Epoxy Flooring Kirkwood, MO Resurfacing Older Garages & Basements
Kirkwood's homes run older than most of St. Louis County, so every floor we do here starts with grinding, repairing and checking the slab before any epoxy or polyaspartic goes down.
Garage and Basement Floors for the First Planned Suburb West of the Mississippi
Kirkwood was laid out in the early 1850s along the Pacific Railroad and named for its chief engineer, James P. Kirkwood, and it is usually called the first planned suburb west of the Mississippi. The housing still tells that story: the median Kirkwood home dates to 1962, more than a quarter were built before 1950, and newer infill houses now stand beside them on the same blocks. We work on all of it: garage floors, basements and other interior rooms, and shop and storefront floors around downtown on Kirkwood Road.
An old slab isn't a bad slab, but it does have a history. Sixty or seventy years of winters, oil drips, patched cracks and the odd coat of hardware-store paint all have to be dealt with before a new coating will hold. So every estimate starts with your actual floor: we note the cracks and chipped edges, find out what has been put on it before, and check it for moisture.
Most coating failures start underneath the coating. That is why each Kirkwood floor is diamond-ground down to clean, open concrete, every crack and spall is filled, and the system is picked for the room: polyaspartic for a garage you want back in use quickly, epoxy for a basement, urethane cement where it's wet or hot. For ballpark numbers before we visit, see our St. Louis epoxy cost guide.
Get a Free Quote
A recent floor from the St. Louis area. At a Kirkwood estimate we talk through colors and finishes for your own floor.
Why Kirkwood Homeowners Call Ascent Epoxy St. Louis
Careful prep for older concrete, typical prices published up front, and one local team from the estimate to the final walk-through.
Free
We Look at Your Slab First
Whether it's a garage behind a 1950s house or a basement under a newer infill home, the estimate happens on site: a talk through colors and finishes, a moisture check, and an itemized price before we leave.
Salt
Ready for Brine Season
About 85 nights a year drop below freezing in St. Louis, and most of them thaw by afternoon. Add beet-juice brine off the highways and a bare threshold takes a beating; a sealed, coated floor keeps the slush on top, where you can push it out.
Style
Finishes That Suit an Older House
Older Kirkwood streets tend to look right with quieter flake blends in grays, tans and stone tones. Newer infill homes can carry a metallic or a bolder flake. We talk through both at the visit.
Checked
Moisture Checked Before Coating
We check the slab for moisture before any coating goes down. On older basement floors that check decides the primer, and sometimes the honest answer is to wait.
Prices
Typical Prices, Published
Flake with a polyaspartic top coat typically runs about $5–$9 per sq ft, and a two-car garage about $2,400–$4,600. Those are typical ranges, not a quote; your written estimate is the real number.
See full pricing guide →Local
One Local Team, Start to Finish
Vince or one of his crew measures and quotes in person, and you deal with one local team from the estimate to the final walk-through.
How a Kirkwood Floor Gets Done
Five steps, starting with a free visit. We plan each one around the weather, because heat and humidity change how a coating behaves.
Free Estimate at Your Kirkwood Home
We look over the slab, measure, talk through colors and finishes and write up an itemized price. No pressure and no expiring discount. Book a visit.
Diamond Grinding & Moisture Check
Diamond grinding strips old paint, sealer and the weak top layer so the new coat bonds to sound concrete. We also check the slab for moisture before anything is applied.
Crack, Spall & Joint Repair
Older Kirkwood slabs usually need the most work at this stage. Cracks, chipped edges and joints are filled and ground flat, and if a crack looks like it is still moving we tell you before we coat, because no coating can hold a moving crack together.
Base Coat, Color & Top Coat
Primer or base coat first, then your color, flake or metallic, then a clear top coat. On humid summer days we start early and keep an eye on the slab temperature against the dew point.
Cure & Final Walk-Through
Most residential floors are finished in one day; some take two. Light foot traffic is fine after about 24 hours, and we walk the floor with you and give you the drive-on time for your system.
The Estimate Is Free, at Your Kirkwood Home.
No guesswork pricing over the phone and no pushy sales. We visit, you get a written price, you decide.
Floor Coatings for Kirkwood Homes & Businesses
Garages first, but not only garages. Every system below is installed by the same local team.
Garage Epoxy
Detached garages behind older houses and attached two-car garages on newer infill lots. Flake with a polyaspartic top coat stands up to hot tires and winter brine and cleans up with a squeegee.
Learn about garage epoxy →
Residential Interior
Basements, laundry rooms, mudrooms and workshops. A seamless coating is easy to mop and has no grout lines; on a basement slab we check moisture before we recommend a system.
Learn about residential epoxy →
Commercial & Retail
Shops, restaurants and offices around downtown Kirkwood. Flake and solid-color systems, with anti-slip additives where people walk in from the weather.
Learn about commercial epoxy →
Industrial & Warehouse
Warehouse and light-industrial floors across St. Louis County, quoted per project after a site visit. Heavy-duty epoxy, polyurea or urethane cement for forklifts, chemicals and hard daily use.
Learn about industrial epoxy →
Repair & Maintenance
Peeling DIY kits, worn top coats and old paint: plenty of Kirkwood garages already have one of these. We tell you whether a recoat will do or the floor needs grinding back to bare concrete.
Learn about repair →Not Sure Which You Need?
Call (314) 334-1902 or send the form with your town and the room. We’ll talk through what the floor likely needs and the typical price range before anyone drives out.
Ask us first →Finish Options for Kirkwood Floors
Three looks and two specialty options.
Made for St. Louis Weather
Heat, humidity, freezing nights and road brine: here is what a properly installed coating stands up to.
Hot-Tire Resistant
Tires come off a 90-degree highway hot enough to soften cheap coatings. A polyaspartic top coat is made to resist that hot-tire pickup.
Chemical & Stain Resistant
Oil, gas, antifreeze and road salt sit on top of a sealed floor instead of soaking into bare concrete. Wipe them up and move on.
UV-Stable
Plain epoxy can yellow in sunlight. Polyaspartic top coats are UV-stable, so a garage that faces the afternoon sun with the door up keeps its color.
Impact & Abrasion Resistant
Dropped wrenches, bikes, mowers and carts. A coating that is properly anchored to the slab takes daily knocks without flaking, which is why commercial and industrial floors use the same chemistry.
Moisture Checked, Not Assumed
No coating makes a basement waterproof. What we can do is check the slab before we coat it, choose the right primer, and tell you when a floor isn't ready.
Easy to Clean & Maintain
A squeegee and a mop. Concrete engineers tell homeowners to rinse road salt off garage slabs; on a coated floor that's a two-minute job.
Rated 4.9★ on Google
Google reviews from St. Louis-area homeowners and business owners.
"The squad member Vince was a great professional. He spent time learning about my problem, coming up with a workable solution, and executing it perfectly. Thanks to their excellent epoxy flooring service, my basement floor is now a sight to behold."
"If you're looking for a reliable and professional epoxy flooring installation service, this is the company to call. They did a fantastic job on our industrial warehouse floors, and the epoxy coating has made them much easier to clean and maintain."
"I recently had my garage floor epoxy coated by this company and I couldn't be happier with the result. The finish is gorgeous and it has made a huge difference in the overall look of my garage. I would definitely use them again for any future projects."
"My basement epoxy floor looks amazing now. The metallic finish really changes the whole vibe. Crew was efficient and polite."
"Called them for my shop floor—super clean job, no mess, and durable finish. Would use again."
"I am absolutely thrilled with the epoxy flooring installation that this company did for my home in St. Louis. They were professional, efficient, and the end result was flawless. I would highly recommend their services to anyone looking for top-notch quality."
Epoxy Flooring FAQs — Kirkwood
Straight answers about price, timing and older slabs in Kirkwood.
Yes. We coat garage, basement and commercial floors throughout Kirkwood, MO and the rest of St. Louis County. Call (314) 334-1902 to book a free estimate at your home.
Typical prices: flake with a polyaspartic top coat runs about $5–$9 per sq ft, a two-car garage about $2,400–$4,600, a three-car garage about $3,600–$7,000, and a basement floor about $6–$9 per sq ft. These are typical ranges, not a quote; older Kirkwood slabs that need more crack repair land toward the top. Our St. Louis pricing guide has more detail.
Not directly. Paint and old DIY coatings are ground off first; otherwise the new floor is only as well attached as the old paint. Grinding is included in every estimate.
Age alone rarely rules a slab out. What matters is cracking, old coatings and moisture, and we check all three at the estimate. Older floors usually need more repair, and that's priced in up front.
Yes, if the prep is right. St. Louis sees about 85 freezing nights a year, hot summers and brined highways. A ground, repaired slab with a hot-tire-resistant polyaspartic top coat handles all of that; skipped prep is what fails.
Usually, yes. We check the slab for moisture and look at its condition first, and if the reading or the cracks say it isn't ready, you hear that before you spend anything. A coating doesn't waterproof a basement, so an active leak needs fixing first. Call (314) 334-1902 for a free look.
Yes. A detached garage gets the same grinding, repair and moisture check as any other slab. Because it's unheated, we pick the day and the system to suit the temperature.
Try colors for your Kirkwood floor online.
Choose a size, finish and color, see a preview, and get a typical St. Louis price range before you call.
Open Floor Studio →