Epoxy Flooring Chesterfield, MO Resurfacing 1970s–90s Garages
Vince and the crew grind, repair and recoat the worn garage slabs of Chesterfield’s 1970s-to-’90s homes, from the streets off Olive and Clarkson Road down to the Valley.
Chesterfield Garages, Basements & Valley Businesses
Chesterfield only became a city in 1988, but most of its houses are older than that. The 1970s were its biggest building decade, the 1980s came next, and the typical home dates from about 1982, on subdivisions reached from Highway 40 (I-64), Olive Boulevard and Clarkson Road. That puts most garage slabs here somewhere between 25 and 50 years old. We work on all of it — worn and stained garage floors, finished and unfinished basements, and commercial floors for the shops, showrooms and back rooms out in the Chesterfield Valley.
A slab that age tells its own story. Oil drips have soaked in, the strip just inside the door may be pitted where winter slush sat, and hairline cracks have opened along the control joints. None of that rules out a coated floor — it just means the prep matters more than the color chart. Every Chesterfield job starts with a visit: Vince or one of his crew looks at the concrete, checks it for moisture, talks through colors and finishes and leaves a written price.
Our method is plain: diamond-grind the slab so the coating bonds to clean, open concrete, fill the cracks and joints, check the moisture, then build the floor in layers — an epoxy or polyurea base, your flake or color, and a polyaspartic top coat. If you’d like a ballpark before anyone visits, our St. Louis epoxy cost guide lays out typical prices by project.
Get a Free Quote
A finished floor from our St. Louis-area work. At Chesterfield visits, we talk through colors and finishes for your own floor and light.
Why Chesterfield Homeowners Call Ascent Epoxy St. Louis
In-person pricing, prep matched to an older slab, and a crew that usually finishes a garage in a day.
Free
An Estimate Made at Your House
Nobody prices your floor off a phone call. Vince or one of his crew comes to the house, measures the garage or basement, looks at the cracks and stains, checks the concrete for moisture and puts a written price in your hand before leaving.
Salt
Built for Brine Season
Between freezing nights and the brine on Highway 40, the first few feet inside a Chesterfield garage door take the worst of winter. A sealed, non-porous top coat keeps salty slush on the surface instead of letting it soak into the concrete.
Style
Colors Chosen in Your Own Garage
Flake blends in grays, tans and browns hide everyday garage dirt well; metallics suit a finished basement or a showpiece bay. You pick the finish at the visit, with your own slab in front of you.
Checked
Moisture Comes First
We check every slab for moisture before any coating goes down. If the reading says the concrete needs a moisture-tolerant primer, it gets one; if it says wait, we tell you to wait.
Fast
Most Garages Done in a Day
Most residential projects are finished in one day; some take two. You can walk on the floor after about 24 hours, and we tell you when it’s ready for the car based on the system we used.
See full pricing guide →Direct
One Local Crew, Start to Finish
Vince or one of his crew measures and quotes your Chesterfield floor in person, and the same local crew installs it.
How a Chesterfield Floor Gets Done
Five steps from the first visit to the final walk-through, each one timed to the slab in front of us and the weather that day.
Free Chesterfield Visit
Vince or one of his crew comes to your Chesterfield home or business, looks over the slab, talks through colors and finishes and puts together a written estimate. No pressure and no expiring discount. Book a visit.
Grinding & Moisture Check
A diamond grinder takes off the worn top layer and opens the concrete so the base coat grips. We also check the slab for moisture — on 25- to 50-year-old Chesterfield concrete, that check decides which primer goes down.
Cracks & Joints
Hairline cracks, chips and control joints are filled with a repair compound made for coatings. If a crack is still moving, we tell you before we coat — a floor coating should never be used to hide settlement.
Base, Color & Top Coat
A base coat, your flake, metallic or solid color, then a clear top coat. On muggy July days we start early and watch the dew point, so each layer cures the way it should.
Walk-Through & Handover
Light foot traffic after about 24 hours. We walk the floor with you, go over care and cleaning, and you keep our number for any question later.
Step One Is Free — a Visit to Your Chesterfield Home.
We measure, check the slab and leave a written price. Whether you go ahead is up to you.
Epoxy Services for Chesterfield, MO
Garages are most of our Chesterfield work, but the same crew handles basements, driveways and commercial floors.
Garage Epoxy
Two- and three-car garages on 1970s–90s slabs: grind off the old stains, repair the cracks, then a flake system under a polyaspartic top coat that handles hot tires and winter brine.
Learn about garage epoxy →
Residential Interior
Basements, laundry rooms, mudrooms and workshops. A seamless coated floor is easy to mop, and anti-slip texture can be added wherever the floor gets wet.
Learn about residential epoxy →
Commercial & Retail
Shops, showrooms, offices and restaurant back-of-house floors in the Chesterfield Valley and along Olive. Commercial jobs are priced per project after a site visit.
Learn about commercial epoxy →
Industrial & Warehouse
Warehouse bays, fleet garages and workshop floors. Urethane cement is available for wet or hot areas, and every industrial floor is quoted after we see it.
Learn about industrial epoxy →
Repair & Maintenance
Peeling at the threshold, a hot-tire mark or a worn kit coating from years ago. We’ll tell you whether a recoat will hold or whether the old coating has to be ground off first.
Learn about repair →Not Sure Which You Need?
Call (314) 334-1902 or send the form with your town and the room. We’ll talk through what the floor likely needs and the typical price range before anyone drives out.
Ask us first →Floor Finishes & Colors for Chesterfield Homes
Five finish options. Each one goes over a ground, repaired slab, and each can take an anti-slip additive.
Made for Chesterfield Weather and Wear
Hot summers, road brine and freezing nights all test a floor. A properly prepped multi-layer floor is built for each.
Hot-Tire Resistant
After a hot drive on Highway 40, a tire can soften a cheap coating and pull it up. The polyaspartic and polyurethane top coats we use are made to resist that.
Chemical & Stain Resistant
Oil, gas, antifreeze and road-salt residue stay on the surface and wipe up. Bare concrete soaks those in; a sealed floor doesn’t.
UV-Stable
Plain epoxy can yellow in sunlight. A UV-stable top coat keeps the color even near an open garage door.
Impact & Abrasion Resistant
Dropped tools, floor jacks and bikes leaning on the floor. The multi-layer system takes daily knocks without chipping through to the concrete.
Humid-Day Install Discipline
On humid St. Louis days, moisture in the air can spoil a coat that goes down at the wrong moment. We check conditions before every layer and shift the start time when we need to.
Easy to Clean & Maintain
Sweep, then mop with a mild cleaner. No grout, no pores, and nothing for salt or oil to sink into.
Rated 4.9★ on Google
Google reviews from St. Louis-area homeowners and business owners.
"I am absolutely thrilled with the epoxy flooring installation that this company did for my home in St. Louis. They were professional, efficient, and the end result was flawless. I would highly recommend their services to anyone looking for top-notch quality."
"Vince and his team did an amazing Job and transformed my basement. Highly responsive and communicative. I highly recommend!"
"Called them for my shop floor—super clean job, no mess, and durable finish. Would use again."
"I recently had my garage floor epoxy coated by this company and I couldn't be happier with the result. The finish is gorgeous and it has made a huge difference in the overall look of my garage. I would definitely use them again for any future projects."
"My basement epoxy floor looks amazing now. The metallic finish really changes the whole vibe. Crew was efficient and polite."
"Vince was also very professional and friendly to work with. He never pressured us into accepting anything outside of our budget, but helped us achieve our vision by giving advice on how to save money where we could without compromising the quality."
Epoxy Flooring FAQs — Chesterfield
Straight answers on price, timing and slab condition for Chesterfield, MO.
Yes — Chesterfield homes and businesses in both the 63017 and 63005 ZIP codes. Call (314) 334-1902 to book a free estimate at your home or business.
Typical prices, not a quote: a flake floor with a polyaspartic top coat runs about $5–$9 per square foot. That’s about $2,400–$4,600 for a two-car garage and about $3,600–$7,000 for a three-car garage. Basement floors run about $6–$9 per square foot. Older slabs that need more crack repair or grinding land toward the top of the range. You get a written price after the free visit; our St. Louis pricing guide has more detail.
Usually, yes. Grinding removes the stained top layer, cracks and joints get filled, and the new coating goes over sound concrete. Deep oil stains sometimes need extra cleaning first. If the slab has heaved or is still settling, we’ll tell you that before quoting a coating.
Most garage floors we install use both. Epoxy or polyurea makes the base that bonds to the concrete and carries the color; polyaspartic goes on top because it cures quickly, holds its color in sunlight and stands up to hot tires.
Yes, when the prep is right. Winters here bring freezing nights and brine on the highways; summers bring hot tires and humid air. A ground, repaired slab with a polyaspartic top coat handles both. When a garage coating fails early, poor prep is the usual cause.
Often, yes. We check the slab’s moisture first and use a moisture-tolerant primer when it calls for one. A coating won’t keep water out of a basement, so if there’s active seepage, that needs fixing first. Call (314) 334-1902 to have the slab looked at for free.
Yes. We quote commercial and industrial floors in the Valley after a site visit, and we coat home garages on both sides of Highway 40. Commercial work is priced per project because every space is different.
Design your Chesterfield epoxy floor in 60 seconds.
Pick your size, finish, and color. See a real preview and your St. Louis price range before you call.
Open Floor Studio →