Epoxy Flooring Creve Coeur, MO Garage, Basement & Commercial Floors
From 1970s homes to busy shops and offices, we coat Creve Coeur floors with epoxy and polyaspartic systems laid on ground, repaired and checked concrete.
Epoxy Floors Along Olive Boulevard and I-270
Creve Coeur was incorporated in 1949 and grew outward from Olive Boulevard, filling in fastest once I-270 and Highway 40 (I-64) were built. The 1970s were its biggest building decade, the median home dates to about 1980, and only about half its homes are detached houses. That mix is why our work here runs from two- and three-car garages to basements and interior rooms to commercial floors for the shops, offices and restaurants in town.
Creve Coeur is also one of the shortest drives for us, which makes an estimate easy to fit around your day. We come out, look the slab over, check it for moisture, talk through colors and finishes, and leave a written, itemized price. No deposit pressure.
Many garage slabs here are 40 to 60 years old: old enough for stains, wear and hairline cracks. We diamond-grind to sound concrete, repair cracks and joints, and match the system to the space, flake and polyaspartic for a garage, tougher builds for a busy commercial floor. Typical numbers are in our St. Louis epoxy cost guide.
Get a Free Quote
A recent install from the St. Louis area. At a Creve Coeur estimate we talk through colors and finishes before you choose.
Why Creve Coeur Homes and Businesses Call Us
A short drive, careful prep and typical prices published up front.
Free
A Free Visit, Not a Phone Guess
Every Creve Coeur estimate is done on site. We check the slab, talk through finishes and write an itemized price before we leave.
Close
A Short Drive for Us
Creve Coeur is one of the closest towns to where we're based, so it's straightforward to fit your estimate, and then your job, into the week.
Business
Floors That Work for Business
Retail floors, restaurant back-of-house, warehouse and storage space. We install epoxy, polyaspartic, polyurea and urethane cement systems and quote commercial jobs per project after a site visit.
Checked
Moisture Checked First
We check every slab for moisture before we coat it. If a floor isn't ready, you hear it from us before any money changes hands.
Prices
Prices You Can See Up Front
A two-car garage typically runs about $2,400–$4,600 and a three-car about $3,600–$7,000. Typical ranges, not a quote: the written estimate after our visit is the real number.
See full pricing guide →Mon–Fri
Visits on Business Days
Call (314) 334-1902 any time. Estimate visits happen during business hours, Monday to Friday.
How a Creve Coeur Project Runs
Five steps, the first one free. Hot, humid St. Louis summers change how coatings cure, so we schedule around the conditions on the day.
On-Site Estimate
We look over the floor for cracks, pitting and old coatings, measure up, talk through colors and finishes, and write an itemized price. No sign-today offers. Book a visit.
Grinding & Moisture Check
A diamond grinder takes off the top skin of the slab and anything put on it before, leaving open, clean concrete. Then we check the slab for moisture before choosing a primer.
Crack & Joint Repair
Cracks, spalls and control joints are filled and ground level so the finish reads flat. A crack that is still moving gets pointed out before we coat, because a coating won't stop structural movement.
Color Coat & Clear Coat
Base coat with your color, flake or metallic, then a UV-stable clear coat. In July heat we start early and watch the slab temperature against the dew point; for a business we'll talk through timing around your hours.
Cure & Handover
Most home garages are finished in one day; some take two. Light foot traffic is fine after about 24 hours, and we walk the finished floor with you before we leave.
Your Creve Coeur Estimate Costs Nothing.
We see the floor before we price it. You get the number in writing and take your time deciding.
What We Coat in Creve Coeur
Homes and businesses, garages and back rooms, all installed by the same local team.
Garage Epoxy
Two- and three-car garages on 1970s and 1980s streets, plus smaller condo and townhome garages. Flake with a polyaspartic top coat handles hot tires and winter brine.
Learn about garage epoxy →
Residential Interior
Basements, laundry rooms, home gyms and workshops. Seamless and easy to mop; on a basement floor we check moisture before we recommend a system.
Learn about residential epoxy →
Commercial & Retail
Shops, restaurants, offices and showrooms across Creve Coeur. Decorative flake or solid color, with anti-slip additives for entrances and kitchens.
Learn about commercial epoxy →
Industrial & Warehouse
Warehouse and storage floors across St. Louis County. Heavy-duty epoxy, polyurea or urethane cement, chosen for forklifts, chemicals and hot or wet areas.
Learn about industrial epoxy →
Repair & Maintenance
Recoats, peeling DIY kits and worn top coats. We tell you whether a fresh top coat will do or the floor needs grinding back to bare concrete.
Learn about repair →Not Sure Which You Need?
Call (314) 334-1902 or send the form with your town and the room. We’ll talk through what the floor likely needs and the typical price range before anyone drives out.
Ask us first →Finish Options for Creve Coeur Homes and Businesses
Color and texture choices, plus two practical options.
What a Coated Floor Stands Up To
St. Louis brings humid summers, freezing nights and plenty of road brine. A well-prepped coating handles each of them.
Hot-Tire Resistant
Heat from tires that just came off I-270 on a 90-degree day can lift weak coatings. Polyaspartic top coats are made to resist hot-tire pickup.
Chemical & Stain Resistant
Motor oil, cleaners, coffee, salty slush: spills stay on the surface of a sealed floor and wipe up instead of staining the concrete.
UV-Stable
Sun through an open garage door or a storefront window can yellow plain epoxy. A UV-stable polyaspartic top coat keeps the color true.
Impact & Abrasion Resistant
Carts, dollies, chairs and dropped tools. A well-prepped coating takes daily traffic in homes and businesses without chipping.
Checked for Moisture
We check the slab before we coat it. A coating isn't a waterproofing system, and we'll say so if a floor has a water problem to solve first.
Easy to Clean & Maintain
A dust mop and a damp mop for a commercial floor, a squeegee for winter slush in the garage. No grout and no open pores for stains to sink into.
Rated 4.9★ on Google
Google reviews from St. Louis-area homeowners and business owners.
"I recently had my garage floor epoxy coated by this company and I couldn't be happier with the result. The finish is gorgeous and it has made a huge difference in the overall look of my garage. I would definitely use them again for any future projects."
"The squad member Vince was a great professional. He spent time learning about my problem, coming up with a workable solution, and executing it perfectly. Thanks to their excellent epoxy flooring service, my basement floor is now a sight to behold."
"My basement epoxy floor looks amazing now. The metallic finish really changes the whole vibe. Crew was efficient and polite."
"If you're looking for a reliable and professional epoxy flooring installation service, this is the company to call. They did a fantastic job on our industrial warehouse floors, and the epoxy coating has made them much easier to clean and maintain."
"The best epoxy flooring installers in town! The entire process was so smooth. We called to get an estimate and Vince came out the next day to discuss our options. Their pricing was reasonable compared to other providers. The guys were very professional and above all, punctual! They completed their job according to our schedule. My partner and I were very happy with the outcome, and grateful that Vince & his team were able to finalize the floor before the grand opening of our store. Thank you guys!!"
"Called them for my shop floor—super clean job, no mess, and durable finish. Would use again."
Epoxy Flooring FAQs — Creve Coeur
Prices, timing and commercial work in Creve Coeur, answered plainly.
Yes. We coat garage, basement and commercial floors across Creve Coeur, MO and nearby St. Louis County towns, including Maryland Heights and Town and Country. Call (314) 334-1902 for a free estimate.
Typical prices: about $5–$9 per sq ft for flake with a polyaspartic top coat, about $2,400–$4,600 for a two-car garage, about $3,600–$7,000 for a three-car, and about $6–$9 per sq ft for a basement. Commercial floors are quoted per project after a site visit. These are typical ranges, not quotes; more detail is in our St. Louis pricing guide.
Usually both. Epoxy builds the base and carries the color; polyaspartic is the fast-curing, UV-stable clear coat that takes the wear. Polyurea and urethane cement are options for specific commercial uses.
No, but it usually needs grinding and some crack repair first. We see that at the estimate, and it's in the written price rather than added later.
Yes, when the slab is prepared properly. Expect about 85 freezing nights a year, brine and beet juice on the highways, and roughly 47 days at 90°F or more. Diamond grinding, crack repair and a hot-tire-resistant polyaspartic top coat cover all three.
Yes. We coat retail, restaurant, office and storage floors, and anti-slip additives are available for every coating. Low-VOC options help in spaces that stay occupied. Call (314) 334-1902 to set up a site visit.
Yes. Basement floors typically run about $6–$9 per sq ft. We check the slab for moisture first; a coating makes the floor easy to clean, but it doesn't waterproof a basement.
Preview a Creve Coeur floor before we visit.
Pick a size, finish and color online and see a typical St. Louis price range.
Open Floor Studio →